(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311135906_1281855972636056_2987376612771239945_nlow.jpg)Protect Your Pride And Joy With The Ghost Immobiliser
Ghost immobiliser ghost will protect your prized item from theft. It's discreet and doesn't require additional key fobs to operate.
The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will allow your vehicle to start.
Simple PIN Code Change Process
With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are a variety of security products that are available from tracking systems to alarms and immobilisers. They're not all equally effective in protecting your vehicle. A tracking system may aid in finding your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on the contrary does exactly what it says on the tin: it disables your car's engine so that it is unable to be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.
The ghost device utilizes the buttons on your car to generate a unique sequence which must be entered in order for the engine to start. This can be accomplished using the indicator stalk, window or heater buttons. In addition it is possible to use a mobile app which can function as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is a great solution for those who want to offer your car to valet parking or servicing. The immobiliser will remain active.
The ghost immobiliser reviews is an innovative and unique device that operates with the buttons of your vehicle instead of as a standalone device. It is not only an effective deterrent for vehicle theft however, it can also be used on any future vehicles you may own. This makes it a better investment than a conventional wheel lock.
Small, weatherproof device
The Autowatch ghost immobiliser is a high-tech security system that guards your pride and joy against key cloning, hacking and ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by car thieves to circumvent the immobilisers in place.
The advantage of using CAN data is that it operates in a silent manner compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be detected by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons in your vehicle, such as the steering wheel, centre console or door panels how to become a autowatch ghost installer create a unique, changeable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app lets you make a single, authorised connection, with a pairing code that is unique to the Ghost and communication between the two devices is encrypted.
The local ghost immobiliser installer also stops car thieves from using a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run when a valid PIN code has been entered. It can be temporarily operated in the Valet/Service mode (with parameters set such as 30mph speed limit) which means you can give your car to a valet or service without having to enter the code.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to block your car's system from running its normal start-up routine until you input the passcode you have created. The system can be turned off or on via your smartphone's app, without the need for additional wires.
The standard factory immobilisers function by using a transponder that is integrated into the key. This transmits a signal to the ECU. If the correct code is transmitted the car will start however, if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and then started. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning, and even key theft. Only by physically towing your vehicle away can thieves steal it and not be able drive it.
Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, and door panels, to create a unique PIN code which must be entered in order to use your car. This is done without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.
In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is covertly integrated into the vehicle to ensure that it can't be removed or disabled by thieves. It is also harder to remove from a car alarm which requires disarming via an action sequence. This makes it a perfect alternative to a GPS tracker that can assist in locating your car after it's been stolen.
Override of emergency PIN code
You do not have to look too far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the latest technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle without your original keys.
The Ghost immobiliser was designed to combat this and provide you with an additional layer of security to keep your vehicle from being targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel, and centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from starting. The unique override pin is on the black card you will receive following installation and is easy to remember because there aren't any LEDs.
The device is hidden inside the vehicle's wires, and doesn't emit any radio signals, so it isn't able to be detected by modern criminals using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to the tracking device.
In contrast to other security systems which rely on a relay in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.
It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems, however this must be specified prior to installing the device. They are also fully service/valet mode compatible and a good alternative to a tracker if you are you are taking your car in for repairs to an electrical issue at the dealers.
Service/Valet mode
In recent years there has been an increase in vehicles being stolen with the owners' keys. It's easier than ever before to steal your pride and joy due to the availability of key cloning devices and door lock picks. We have developed the Autowatch Ghost Installers Near Me Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.
It communicates directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't utilize radio frequencies or a key fob. This means it isn't detected by diagnostics or other car hacking devices. It also prevents you from introducing a new ECU or key to bypass the system, since only the PIN code allows the engine to start.
The device is hidden inside your car and is reached via the buttons on your steering wheel, the centre console and door panels. A unique and reversible PIN code sequence up to 20 digits has to be entered prior to being able to start your vehicle.
This is the first aftermarket CAN bus immobiliser that was developed. It will prevent your vehicle from being started or driven if you don't enter a PIN code first. If you are driving away with the device arming the indicator will flash on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN at this time the indication will continue to flash and will require a new PIN code for every attempt to start your vehicle.