replacement double glazing window handles UPVC Door Handles
You can find the ideal handle for your door, whether replacing your existing handles or adding extra security. These upvc handles are easy to install and meet the required 92mm centres of multipoint locks.
The most important measurements to consider are the backplate fixing centers and key hole dimensions for levers and levers. Check these carefully against your existing measurements prior to placing an order.
Lever/Pad
Lever pad handles consist of a lever on one side and a window handle upvc that is shaped like a paddle on the opposite. They are intended for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.
Once you have selected the right handle for your doors the available finishes will be shown in the drop-down list. Not all styles of handle are available in every finish though and you should always look over the technical drawings and sizes sections for the specific product that you want to make sure that you can get the correct size and fit.
When you are choosing the new set of lever pad door handles made of Upvc it is essential to ensure that they are in line with the PZ (distance between the handle spindle and the center of the cylinder hole) of your current multipoint door locks, since they have to be in the same line to allow doors to remain locked, either from the inside or the outside. Our handles are designed to fit a wide range of standard cylinders, however it is always worth double-checking before ordering.
If you want to upgrade to dual spindle levers you will need to remove the existing handles and take apart the lock case. This will require an extra split inline cylinder. You can purchase these separately. We have included a technical diagram in the images of each product.
It is a good idea to loosen the screws that hold the door handle you have and then examine the mechanism. You may need to loosen the screws a bit more in the event that they are not tight, and then you can remove the old spindle and handle and replace it with a new door handle made of upvc. Before screwing the handle into position, it is recommended to check that it is in the correct place. You can do this by inserting your finger into the gap between the frame of the door and the handle to make sure it is in a level position.
Lever/Lever
The lever handles on doors are used to operate a multi-point lock that uses an Euro cylinder. They can be found on a variety of double glazed front door handles upvc doors, as well as on some wooden and aluminium doors. They are equipped with an inside lever and a paddle on the outside and are generally available in two different types. Sprung - they have a spring cassette fitted within the backplate to help bring the handle lever to the horizontal position. Non-sprung - These do not have a spring mechanism, and will need to be manually pulled to raise the handle lever back to its horizontal position.
To fix a door handle that is sagging, you will need to locate the detent access hole or pin, which is typically a small round or rectangle with a protruding hole situated on one side of the handle base plate. Once you have located the hole for accessing the detent or pin, you can remove it using an screwdriver.
When the handle is in a horizontal orientation, you can re-install the screws and tighten them to make sure the handle remains secured to the base plate. You may want to apply a threadlocking solution to the threads of screws to improve grip and prevent them from loosening over time.
There are a myriad of reasons why lever door handles droop. The most frequent cause is that the fixings are too tight which causes the lever bearing to get tangled up against the door. It is also possible that the levers have not been operated at a right angle, which compresses the latch mechanism and stops it from fully springing into action.
Another common reason is that the sprung lever is not operating correctly and this is typically due to the spring not being in the correct position within the backplate. The simplest way to check this is to operate the handle to see whether it returns to the horizontal position.
If your door handles are loose, it is crucial to find the issue fast, as this can lead to excessive wear on the screws and eventually to the handle falling off of the base plate. You should also tighten loose screws frequently to stop them from becoming looser.
Lever/Snib
These handles made of upvc are also known as 'Snib' handle sets and have a snib button on the top of the lever that you can press down to lock your door if you don't have an fake lock. These handles are fitted with a Fullex lock 68PZ. (68mm between spindle and the centre of the lock). We also stock a variety of other door handles with 68PZ from various manufacturers, including Ferco and Fab & Fix.
You can update your home by changing the door handles, whether you are replacing existing handles or installing new ones on doors that you have built. There are a variety of styles available for door handles made of upvc, including the traditional lever on the backplate. Other options include curved or straight short latches, and dummy knobs for multi-point locks. These are great for French doors.
Rose door handles are circular or oval-shaped versions of lever on backplate handles. These door handles are characterized by a lever or a knob that is attached to the backplate. The backplate is removable for concealed fixing.
These handles are available in a variety of finishes including coloured and chrome finishes to match your door and other hardware, such as knobs hinges, and bolts. Some handles have a screws that grub the lever or knob firmly to the spindle. Other handles come with bathroom spindles that can be used to control bathroom locks and include a thumbturn turn and release mechanism, perfect for use on bathroom doors.
Mortise
The tubular latch is the most likely to be the cause if your uPVC door handle is stuck open. This can be caused by many things but the most prevalent is an absence of lubrication within the latch plate. This can be resolved quickly by opening the door and spraying lubricant over the lock and handle. Or, it could be that the latch plate has been separated from the backplate. This could be more of a problem and will require a specialist to repair.
A multipoint handle system is the ideal solution for a stuck door handle. The handles are inserted into the faceplate of the door and are operated by the thumb turn knob or key that triggers a cam that locks the deadbolt. The handles are available in a variety of sizes to suit different types of uPVC door and in various attractive finishes that are compatible with existing hardware. The handles are available via the internet or at an authorized locksmith in your area. They are simple to install and come with clear instructions.
To select a replacement Upvc Door Handle handle set, you'll need to know the PZ size of the cylinder. This is the distance from the edge of the door frame to the centre point of the hole for the handle in millimetres. You will also need the type of lock on your door, whether it's a mortise or hook lock. The most efficient way to locate the correct handle after you have the measurements is to use the brand filter on the website. This will narrow down your options, and you will then select the correct size from there.
A typical handle set includes an arm with two screws of various lengths, drill guides, and installation instructions. The smarter models, such as the Igloohome Smart Mortise 2+, include an entire mortice lock that has an integrated keypad. These are more complex models and are ideal to professional installers or skilled DIYers. Certain handle sets come with a range of additional accessories, such as weather strips, which can be used to enhance the look of the door.(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/Glass-Replacement-150x150.jpg)
