(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)Sash Lock Door Handles
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/12/Replacement-Doors-300x200.jpg)If you're looking to increase the security of your home without sacrificing aesthetics, go for sash lock door handles. They are used in conjunction with a mortice latch or sash lock. They can be combined with a night latch to add locking for doors inside.
These handles are a combination of two levers mounted on a backplate. They can be used with three- or five-lever mortice locks. They can be combined with a tube latch.
Lever Lock Handles
There are many kinds of lever handles that can be matched to any style. The rustic lever latches go well with farmhouse or ranch-style decoration and are also well-liked in modern homes. Classic lever handles are either round or spherical and easy to hold. They are simple and affordable, and can be used in any style of decor. For a stylish style, choose a polished chrome or satin nickel handle. These finishes are easy to clean and are durable. Other options include antique bronze as well as polished brass. A lot of handles feature a decorative design, such as tiny amber worm eyes or long-horned crystals. Some levers have a pin, star or some other shape that is molded into the bottom.
To replace the lever lock door handles, you must have the right screwdriver, or a tool to disassemble them. Depending on the design and model you may have to make use of an awl or nail to remove the lever handle. Some lever handles feature an apex or notch on one side of the base which can be used to open it.
Follow the manufacturer's instructions to remove your old handles when you have the right tool. Check the spindle of your new lever. Existing doors are often morticed (cut into the door) to accommodate latches from the past or locks, and need to be fitted to a specific spindle size. Most lever handle manufacturers have an established door spindle size for handles.
If you want to replace a sash-lock door handle, take off the handle you have previously installed and disconnect the tubular latch bolt from the strike plate that is on the door frame. You will then need to drill a hole into the door frame, then insert the latch bolt through and connect it to the strike plate within the door frame.
It is crucial to remember that when you install new lever handles the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user must not be required to grip their hands tightly or turn their wrists. To ensure that they meet ADA standards of compliance, the lever door handle cannot be operated with the thumb and finger or the entire hand.
Sash Lock Handles
The primary function of sash locks is to seal the door by pulling the moving sashes tightly. This prevents drafts from entering the room and helps maintain indoor temperatures, which can help save energy bills throughout the year. These locks are great for doors that do not require for a keyed lock.
Sash locks are also known as mortice sashlocks. They incorporate a latch and dead bolt into a single case that is inserted to the surface of the door. They are used in conjunction with a pair of door handles and are available in a variety of different options to choose from to suit your home.
The lever lock handle is operated by a lever that has an opening cut into the backplate below. This permits a key to be that is inserted into the mortice frame to operate the lever. This lock is most commonly used on doors that do not lock, like those found in dining rooms and living rooms. However it can also be used with a tubular lock to provide an extra secure door.
These are designed to keep the sash window renovation in place at several points, and include a hook that fits inside the keeper. These are available in various styles and designs that are suitable for various window sash replacement types like hinged or sliding casement window sash windows. Some are made from cast aluminium, others from brass and even wrought iron. These are available in various finishes to match other elements of the door furniture like escutcheons to guard the keyhole.
The 3 lever sash locks are only suitable for internal doors. They do not offer the level of security required by insurance companies. They are also less resistant to forced entry than their five lever counterparts, making them more susceptible to being harmed.
A door sash lock that has 5 levers is a much better option for external doors, as it offers higher levels of protection against forced entry and is much more difficult to bypass or pick. These locks are a brand new design that has been tested and certified to meet the strict building, fire and disability regulations.
The first step to replacing the handle of a sash lock is to remove the old fastener, by removing the screws from both ends. Make sure you have a screwdriver in your bag and carefully separate the components to avoid damage. Mark with a pencil the location of the screw holes, so you can align the new fastener correctly when you are putting it on. Clean up any dust or flecks of paint before screwing the new fastener in place. It is essential to test the handle to make sure it is working correctly and makes a an encapsulated seal.
Tubular Latch Handles
The tubular latch is an internal latch that is operated by turning the handle. It is designed to close a door but it does not lock it like mortice locks. They are most commonly used on internal doors, where locking is not necessary. They can be equipped with knob handles or levers.
Tubular latches are available in various sizes. They range from the cheapest to top-of-the-line architectural quality. The size of the door is contingent on its use and whether it has a lock. For example the bathroom door might require a thumbturn and release mechanism in case in an emergency, therefore you'll need a lockable latch.
The backset of your door will also determine the latch you select. This is the distance between the edge of your door and the center of the hole that is used for the door handle rose/knob, and you must choose a latch with a matching backset measurement. This will ensure that your knobs and handles can operate the latch without a hitch.
If you are installing a knob or lever with a spring, or without spring, it's essential to choose a heavy-duty tubular latch. It should come with an elongated follower that is double glazed timber sash windows-sprung. This will ensure a smooth latch action and prevent it becoming slow or unresponsive after prolonged use.
The next step is to install the latch onto the door. The first step is to ensure that the latch is level with the top of the door frame/casing. Note the location of the plate and drill holes. Using a countersink drill bit will help to create the proper recess for it to sit comfortably in.
Once the latch is secure, you can then screw it onto the door. It is essential to verify that it's functioning correctly prior to fitting the door handles and putting in the locks, so make sure to test it by closing and opening the door repeatedly. If the door isn't working properly try lubricating your door with WD40. Then re-try it. If you continue to encounter problems, it may be necessary to talk to an expert installer or locksmith.
Keyhole Handles
Keyhole handles function with a tubular latch fitted to the door to open and close it. The handle is able to engage the latch when pushed down and then releases it when pulled up. They are typically fitted for doors that are inside like those found in living rooms and dining rooms. However, they can be fitted to the front door, if they are paired with the nightlatch.
Door knobs are more contemporary handles that include spring levers/handles with a square or round fixing stem and a thumb-turn or escutcheon. They are available in various designs and finishes that will fit the doors in your home. They can be used with Euro cylinder locks or multipoint locking systems to add extra security to your door. This is achieved through several points of locking along the door's height. It requires door handles that are compatible with the right lock centre dimensions to accommodate the barrel of the cylinder.
A keyhole escutcheon covers the existing keyhole in the door to hide it and give the handle a sleek look. They are available in an open-top or screw-on style and are available in a variety of finishes to match your door handle. Additionally, a recessive escutcheon can be affixed to the edge of the door to hide the keyhole and provide a more modern appearance.
The majority of the handles described above are designed to work with either a mortice lock or sash lock mechanism. However some are compatible with Euro cylinder locks as well. They are designed for uPVC doors and require compatible door handles with a Euro cutout for the cylinder and appropriate screw holes within the backplate to accommodate the euro cylinder. These handles might also require an escutcheon for Euro-cylinders or a standard escutcheon, depending on the application.
Whether you choose a mortice lock, sash lock or tubular latch for your door, you need to be aware of the different characteristics of each and the requirements they have for compatibility with the other components of your uPVC door system. You'll need to consider the door thickness and the door hinges and frame reinforcements, the size of the backplate to the handle, the lock's central dimensions, and the screw centres on the cylinder.