Peugeot 308 Key Fob Problems and how to get a new peugeot car key to Fix Them
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311135906_1281855972636056_2987376612771239945_nlow.jpg)If your peugeot expert key fob programming 308 key fob stopped working after a few days, it could be due to a dead coin battery, water damage the receiver module or a defective electronic chip. Fortunately, these issues are easy to fix and you'll be able to get your car back to normal in no time at all!
Car keys can also get damaged because the key blade gets worn. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become too weak to send a strong signal to the car. This can cause the key fob to stop working, preventing you from locking or opening the doors or even starting your engine. You'll need a replacement battery for your key fob to correct this.
You can purchase a new battery at an auto parts store, or at your local hardware store. Make sure that the battery is brand new and not sitting on the shelf for too long. A brand new battery has more capacity and can transmit a stronger signal to your vehicle.
After replacing the battery Try locking and unlocking the doors of your peugeot 107 key by using the key fob. If the doors aren't unlocking, it's likely that the receiver module inside the car is the culprit. The local Peugeot dealer can reprogramme the receiver module.
The internal chip of the key fob could also be damaged. This could happen if drop your key fob on the ground or expose it to water. Rubber seals that protect your chip from moisture can become worn out over time. This is particularly true when you expose your key fob to water for extended periods of time, such as swimming it in the ocean. To prevent this from happening you must keep your key fob clear of water and out of water.
Water Damage
Don't give up on your key fob when it gets wet, no matter if you slipped into a pool or fumbled into a pool. The key fob is protected by rubber seals however, prolonged exposure to water could affect the electronic chip. Water is a great conductor, and any water that is absorbed into the key fob will cause an array of short circuits which can eventually harm the electronic chip. After removing the battery, clean the contacts with isopropyl alcohol and dry it completely before putting it back in.
Your peugeot 108 key replacement 308 may not start because of a dead battery. If you have a spare vehicle, jumper cables can be used to get the engine running again. If you suspect that the battery is at fault and it is not working, it should be replaced.
Another possible cause is a bad receiver in the vehicle, which could prevent it from receiving a signal from the key fob. It could be due to a issue with the antenna, or wiring or the key fob may be damaged. If you're using a new key fob it could need to be programmed to your vehicle. If you're unable to fix the issue on your own, contact a professional technician. A trained technician in the field will be able to identify the issue quickly, and fix it immediately.
Radio Interference
Interference can result in problems such as a key fob that isn't recognized or has a limited range. The interference can be transmitted or radiated which is caused by speaker and power cables passing too close to electrical parts. Generally speaking, rerouting cables or moving them away from the components can solve the problem.
It's unlikely that someone is watching your key fob's signal in an attempt to steal your vehicle however it is possible that radio interference has drowned out the signal. This is a simple problem to fix.
If your key fob isn't being recognized by the system, try replacing the battery. Also, ensure that the battery you are using is the correct size and type. A wrongly sized battery can cause damage to the fob.
Some aftermarket alarm systems and radar detectors operate on the same radio frequency as your key fob, and they can cause them to interfere with your key signals. It is advised to avoid using these devices on your key fob.
Pairing Issues
The remote keyless entry system that is used in a car has a receiver which receives radio frequencies from the key fob. You won't be able to start your vehicle if the receiver is malfunctioning even if your key fob works and can be reprogrammed. The issue could be caused by a variety of factors, including the battery of a coin that is dead and water damage. The receiver could also be failing due to a software error or internal damage in the key.
One of the most frequent reasons that your Peugeot 308 key fob isn't working is because the coin battery inside has gone out of service. This battery can be easily replaced, however you must ensure that it's the proper battery for your keyfob. If you use a battery that is not correct, it could result in further problems with the key fob, so it's best to use the original or an alternative that is similar in size, voltage and specifications.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)Another reason why your peugeot key fob replacement 308 key fob might not be working is that it is linked to a different car. This could happen if you have given your key fob away to a friend or in the event that the key was used to unlock and begin other vehicles. You can resolve this by reprogramming the fob using an OBDII scanner. This tool typically asks you to provide certain details about your vehicle, for example the VIN or engine type, and it's essential to fill in the correct information.
