Choosing Upvc Window Replacement Hinges
It's not as difficult as it may appear to select and install the replacement hinges made of upvc. Make sure that the arrows on the hinges face the right way and determine the thickness of the hinge arms on the frame that opens (13mm or17mm).
There are many different kinds of hinges, each with their distinct characteristics. This article will review some of the most common uPVC hinges and their advantages.
Egress/Easy Clean Hinge
These are a great choice for replacing or upgrading your fire escape safety windows since they open up to a full 90 degree angle. They can also be lowered to an easy clean position to allow you to easily reach the outside of your windows to clean them without the need to climb a ladder or lean over at potentially hazardous angles.
Yale is one of the most reputable and well-known brands in the field of home security. These hinges can be used with any kind of uPVC side-hung windows. They can be moved into the easy-to-clean position by pressing in a small button and then sliding the window sash to one side. After closing, the window sash will revert to its original position.
Both 13mm and 17mm sizes are available. Depending on the size of your existing window, we suggest using our Egress Selection Guide to determine the best product for you.
The hinges are designed to work with standard side-hung frames, either upvc window replacement hinges or aluminium. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the risk of an accidental closure during severe winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
With no buttons or catches the Nico Egress Easy Clean Friction Hinge is simple to operate and provides a simple solution for emergency egress and secure cleaning. Press the hinge retention clip located in the inner corner of the bottom corner. This will release the bottom and top catches which will allow you to slide the sash into an easy-clean position. Once it is in the easy-clean position, close the window to return the hinges to their original position.
Fire-Escape Hinge
Fire Escape Hinges (also known as “Easy Clean”) are used to replace side-opening windows for fire safety reasons. These hinges allow for an opening larger in the event of fire. This type of hinge is legal in any room with a window as stipulated by building regulations.
They have a unique friction stay that opens the window to a 90 degree angle and allows the opening sash to slide across the glass when it is open to make it easy to clean the external side of the glass, without having to climb ladders. The hinges are simple to use and have no complicated buttons or catches. They can be operated from inside of the house using a safe, simple lever.
The hinges, made in the UK by Cotswold and Cotswold, have the safety of children in everyday use. It can be reverted with an invisible button. You'll be able to rest of peace of mind knowing that your children won't accidentally open the windows too wide. They are available in 13mm and 17mm stack heights.
Take a measurement of the length of the current side-hung pvc window hinges hinge that is attached to the frame. (See the article on measuring the length of upvc window hinges). Select the correct size hinge from the list below.
Note that this measurement is taken at the part of the hinge that attaches to the frame, not the sash. The actual hinge length could be shorter or longer depending on how your windows were made in the past. When choosing the size of the hinge, most frames made of upvc will have a stack height of 13mm however if your original window frame has 17mm, you should select this option. You can also use the 4mm packer in order to make up for the difference. All the hinges are supplied with two hands (1 left and 1 right). Screws are not included in the hinges. They can be purchased separately if needed. We recommend using our Upvc window hinge repair screws. These screws are designed to improve the performance of your hinges and allow them work effortlessly for a longer. They have a lower friction design and a better weather seal, with a brand new nylon reducer end cap.
Restricted Hinge
Standard hinges can make it difficult to open a window completely. The restricted child safety friction hinges are a solution to this problem and provide a solution for situations where ventilation is required but access to clean up or escape in the event of fire isn't possible. They restrict the amount of opening the sash, and allow overriding this restriction by pressing an appropriate button. They are available in 13mm and 17mm stack heights and can be used for top and side-hung windows.
The Nico Restricted Egress Friction Hinges combine the benefits of the standard restrictor, as well as an escape pivot to provide a simple and efficient method of complying with building regulations. It is available in 13mm and 17mm stack heights and can be used for both top and side opening uPVC window. It is supplied as a pair where one hinge is restricted egress, the other unrestricted allowing one of these to be installed on the bottom of the sash whilst the other hinge is installed to the top.
These uPVC hinges are designed to be used on windows that cannot be fully opened, for instance a child's bedroom. The mechanism restricts the amount the sash can open up to 100mm for safety and re-engages once the window is closed.
These uPVC friction-type hinges can be used with any type of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey apartments or ones that require ladders. These can be enhanced by our security enhancements, such as hinge guards and protection plates for the hinge or dog bolts, in order to achieve PAS 24 performance.
When replacing a window hinge, it is crucial to determine the length of the current hinge so that you can get replacements that are comparable in size. The easiest method to do this is by viewing the hinge in the gallery and determining the location you would like it to be. The hinges that hang from the top can only be positioned on one side, whereas the side hung ones can only be placed on one side.
Standard Hinge
Standard hinges feature metal-to-metal contacts and don't require additional components to reduce friction. It's available in a variety of finishes and is also fire-rated. For a quick way to determine the radius of your hinge, lay it flat and then line up with a quarter and dime in two corners. If the dime is more snug, the corner is rounded by 1/4 inch. If the quarter fit better, it's rounded to 5/8 inch.
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/Glass-Replacement-150x150.jpg)The hinge you choose can enhance or ruin the appearance of your door. It's essential to match the style and finish of your door with the hinges to create a seamless look that's both functional and visually appealing.
